Susceptibility indexing method for irrigation water management planning: applications to K. Menderes river basin, Turkey

A susceptibility indexing method was developed based on vulnerability and quality indices. The contamination susceptibility index (SI) at a given location was calculated by taking the product of the vulnerability index (VI) and the quality index (QI): SI = VI × QI. This method incorporates both hydrogeological and hydrochemical data for a comprehensive index mapping. The DRASTIC index methodology was used for the hydrogeological data evaluations. The quality index calculation procedure based on a water quality classification scheme was introduced to evaluate hydrochemical data. The suggested susceptibility indexing method was applied to the Küçük Menderes river basin located in western Turkey. The susceptibility index map shows both hydrogeological and hydrochemical data related to the contamination problem including areas that should be taken into consideration during water management planning. The index map indicates that the most susceptible groundwater is located along the river channel between Kiraz and Tire towns, in the Selçuk area and along the Fertek stream channel to the north of Torbal? town. The results indicate that the incorporation of both hydrogeological and hydrochemical datasets enables more realistic evaluations than those of an individual dataset to estimate the groundwater contamination susceptibility of an aquifer. The numerical procedure applied could be extended further by including other parameters such as retardation, potential contaminant sources, etc. that affect the water quality in a given basin.     

Online sorting of recovered wood waste by automated XRF-technology: part II. Sorting efficiencies

Sorting of waste wood is an important process practiced at recycling facilities in order to detect and divert contaminants from recycled wood products. Contaminants of concern include arsenic, chromium and copper found in chemically preserved wood. The objective of this research was to evaluate the sorting efficiencies of both treated and untreated parts of the wood waste stream, and metal (As, Cr and Cu) mass recoveries by the use of automated X-ray fluorescence (XRF) systems. A full-scale system was used for experimentation. This unit consisted of an XRF-detection chamber mounted on the top of a conveyor and a pneumatic slide-way diverter which sorted wood into presumed treated and presumed untreated piles. A randomized block design was used to evaluate the operational conveyance parameters of the system, including wood feed rate and conveyor belt speed. Results indicated that online sorting efficiencies of waste wood by XRF technology were high based on number and weight of pieces (70-87% and 75-92% for treated wood and 66-97% and 68-96% for untreated wood, respectively). These sorting efficiencies achieved mass recovery for metals of 81-99% for As, 75-95% for Cu and 82-99% of Cr. The incorrect sorting of wood was attributed almost equally to deficiencies in the detection and conveyance/diversion systems. Even with its deficiencies, the system was capable of producing a recyclable portion that met residential soil quality levels established for Florida, for an infeed that contained 5% of treated wood.     

An approach to optimise nutrient management in environmental sanitation systems despite limited data

The material flow analysis method can be used to assess the impact of environmental sanitation systems on resource consumption and environmental pollution. However, given the limited access to reliable data, application of this data-intensive method in developing countries may be difficult. This paper presents an approach allowing to develop material flow models despite limited data availability. Application of an iterative procedure is of key importance: model parameter values should first be assessed on the basis of a literature review and by eliciting expert judgement. If model outputs are not plausible, sensitive input parameters should be reassessed more accurately. Moreover, model parameters can be expressed as probability distributions and variable uncertainty estimated by using Monte Carlo simulation. The impact of environmental sanitation systems on the phosphorus load discharged into surface water in Hanoi, Vietnam, is simulated by applying the proposed approach.     

Excess lead alters growth, metabolism and translocation of certain nutrients in radish

To elucidate the deleterious effects of excess lead on radish (Raphanus sativus) cv. Jaunpuri plants were grown in refined sand in complete nutrient solution for 30 days. On the 31st day lead nitrate was superimposed at 0.1 and 0.5mM to radish for 65 days. A set of plants in complete nutrient solution was maintained as control for the same period without lead. Excess Pb at 0.5mM showed growth depression with interveinal chlorosis on young leaves at apex. Excess Pb reduced the fresh and dry weight pronouncedly at d 65. Lead accumulation reduced the concentration of chlorophyll, iron, sulphur (in tops), Hill reaction activity and catalase activity whereas increased the concentration of phosphorus, sulphur (in roots) and activity of peroxidase, acid phosphatase and ribonuclease in leaves of radish.     

Prediction of ambient PM10 and toxic metals using artificial neural networks

In this study, an artificial neural network is employed to predict the concentration of ambient respirable particulate matter (PM10) and toxic metals observed in the city of Jaipur, India. A feed-forward network with a back-propagation learning algorithm is used to train the neural network the behavior of the data patterns. The meteorological variables of wind speed, wind direction, relative humidity, temperature, and time are taken as input to the network. The results indicate that the network is able to predict concentrations of PM10 and toxic metals quite accurately.     

Current and Future Strategies for Water and Wastewater Management of Istanbul City

Istanbul has experienced rapid increases in population to more than 12 million people, which has created infrastructure problems of water supply and wastewater treatment and disposal. In this article, the achievements and approaches of the Istanbul Water and Sewerage Administration (ISKI) to solve the water shortage problem and to improve services are summarized. Istanbul had a very severe water shortage problem in 1994 because of ignorance of the implementation of the needed projects. After reviewing the reasons and causes of the problem, new priority criteria adopted after 1994 are given. Following the implementation of the projects determined according to the aforementioned criteria, water supplied has exceeded the water demand. The added capacity is equal to one to three times of the capacity built up to 1994 for water treatment, service reservoirs, pumping stations, transmission lines, and the water distribution network; water quality has been improved the meet local and international potable water standards. Unaccounted for water has been reduced from 60% to 27%. The percentage of treated wastewater has been increased from 10% to 90% in 8 years, resulting in drastic improvements and rehabilitation of the Golden Horn and coastal water quality. Through improved customer services, complaints were reduced from 33% in 1994 to 0.3%. Some of the main criteria and the approaches behind this success are summarized. Published online     

Determination of Cadmium Levels in Agricultural Areas of Çarşamba and Bafra Plains

Cadmium pollution resulted from fertilizer applications were studied by determining cadmium levels in agricultural and non-agricultural soils of Bafra and Çar?amba plains. Soil samples of 68 were collected from agricultural (34) and non-agricultural (34) areas. The sample of 2 g was placed in a test tube and digested with hydrochloric acid and nitric acid mixture (3:1, v/v) in an aluminum block. Taking up the evaporated residue was dissolved in 1% nitric acid and total cadmium concentrations were determined with GF-AAS. Mean level of cadmium contents were found in agricultural areas 0.162?±?0.078 for Çar?amba and 0.433?±?0.288 mg kg^?1 for Bafra. The accuracy of the method was tested with determining cadmium contents of standard reference material and cadmium spiked soil samples.     

An Analogy on Assessment of Urban Air Pollution in Turkey Over the Turn of the Millennium (1992–2001)

Rapid industrialization and urbanization in Turkey, especially over the last twenty five years, has provided better living standards to its residents, but it also caused a decrease in environmental quality. In late 1970's, air quality monitoring activities were started in some major cities by individual researchers in Turkey. It was just around the 1990's that a countrywide program on continuous air pollution monitoring in major province centers and selected large towns was launched. The impact of air pollution on people depend on various factors, such as existence and magnitude of coal powered energy generation plants, type of urban heating and their efficiency, and the numbers and specifications of vehicles. In this study, current Turkish urban air quality over the turn of the Millennium (1992–2001) is studied in the light of the country's worst cities in terms of outdoor air quality, the number of upper respiratory diseases, sinusitis, bronchitis, and pneumonia cases in these provinces reported by the state medical treatment facilities in 2001. The population that is under outdoor urban air pollution hazard was computed. A comparative analysis between the provinces that use natural gas and others that use fossil fuels was also completed in order to project monetary gains if the studied provinces will transform their indoor heating and industrial operations to be run by natural gas or other cleaner energy sources. If natural gas use in air polluted urban centers could be realized in the near future, approximately 212 to 350 million US dollars per annum could to be saved just by reducing health related problems caused by outdoor air pollution.     

Flue gas treatability studies: a tool for techno-economic control of industrial air pollution

Air pollution problems in developing countries have gained larger fraction in the last decade especially due to non functioning and non implementation of effective air pollutioncontrol devices in industries. In industrial wastewater management, adequate treatability studies are conducted to arrive at a techno-economic treatment option. However no suchstudies were done for reducing air pollution or emission fromindustries until now in India. Little information was availableabout such studies in other countries. This article provides information about a novel technique known asflue gas treatability studies and to undertake such studies, a pilot scale system is installed in Air Pollution Control Divisionof M/s National Environmental Engineering research Institute, NEERI, Nagpur-20, India. This study is a tool for techno-economicselection of air pollution control systems specially for small/medium scale industrial emissions.     

Determination of waterscape beauties through visual quality assessment method

Besides being an indispensable life element, water is also in the first rows among the most important landscape elements that have the visual reserve value in both natural and cultural environments. In this study, the aim was to present suggestions about the use of waterscapes in landscape design and planning attempts by determining the water types bearing high visual reserve values among different types of waterscapes bearing high visual reserve values. The visual quality assessment method was used in this study. One hundred and twenty eight university students ranked the six waterscapes in a visual quality survey. The results showed that urban waterscape scenery [visual quality point (VQP) = 6.0391], was the most preferred category, whereas, river scenery (VQP = 3.5547) was the least preferred. The second preferred waterscape was waterfall (in rural landscape) scenery (VQP = 5.8594) and the third was standing water scenery (SWS; VQP = 5.3672). The relationships between landscape parameters and visual quality of landscape indicated that vividness and fascinaty parameters had a significant relation with preference. Some suggestions were made regarding the use of wa terscapes visual value in planning and designing of the landscape.